Toggle Nav
Search
CALL US
OUR LOCATIONS
Login
Cart 0
  • info@hkcalibrations.com.au
    • Menu
    Account

    XW-ED Omega Link Smart Probe & Counter/Digital Wireless Transmitter

    The XW-ED is a rugged wireless transmitter which connects to any Layer-N Smart Probe and transmits to a ZW-REC receiver. Optional outputs enable local control or alarms
    $316.78
    Enquire
    Email Print this Page

    Data Sheet (PDF)

    XW-ED Omega Link Smart Probe & Counter/Digital Wireless Transmitter

    The XW Series Transmitters provide a wireless interface to a range of digital probes, digital I/O, and analog process signals. The radio is an IEEE 802.15.4 compliant transmitter operating at 2.4 GHz designed to transmit up to 1000 m* (3280’) and 100 m* (328’) to a ZW-REC coordinator.



    Data Chart

    The ZW-REC connects directly to an Ethernet network to serve active web pages and display the data. You can monitor and record data over an Ethernet network or the internet. These wireless devices are designed for demanding industrial applications indoors and harsh outdoor environments. The electronics are protected in a rugged weatherproof polycarbonate NEMA 4 (IP65) rated housing. The XW-ED Transmitters come in two variants:

    XW-ED

    The XW-ED model accepts a wide variety of digital probes, function as a rate/timer/totalizer, or as an mA/mV meter.

    XW-ED-PRO

    The XW-ED-PRO variant adds 2 Discrete Open Drain Digital Inputs / Outputs on a 4 Pin M12 Male connector. These can be used to trigger alarms, monitor a switch, or control other equipment.

    Easy Configuration with SYNC

    SYNC by Omega allows you to configure device runtime parameters, view process values, export data, and allows you to efficiently set your XW Transmitter to operate under your preferred preferences.


    Video Learning: Configure your XW Series Transmitter with SYNC Software

    Specifications

    Digital Inputs

    Type Range Accuracy
    Frequency 0.01Hz to 100 Hz ±0.5%
    Frequency 100Hz to 1000Hz ±1 Hz averaged over 1s
    Counter 0 to +8388608 ±1 count max
    Up/Down Counter -8388608 to +8388608 ±1 count max
    Pulse Width (Tpw) 0.2ms min ±50uS ±1%
    Pulse Delay (Tpp) 0.2ms min ±50uS ±1%
    Duty Cycle 1% to 99% ±50uS ƒ

    Process Inputs

    Type Range Accuracy
    Current 0 to 24 mA ±0.1 mA
    Voltage 0 to 1V ±5.0 mV

    Wireless Communication

    Standard: IEEE 802.15.4, DSSS
    Frequency: 2.4 GHz (2400 to 2483.5 MHz), 16 channels
    Network Topology: Star topology
    Transmit Power: 9.5 dBm
    Receiver Sensitivity: -96 dBm
    Range: Up to 1000 m* (3280’) outdoor and 100 m* (328’) indoor
    *without obstruction

    Power

    Input Voltage: 5 to 36 Vdc, 24 Vac +/-10%
    Input Power: 0.8 W maximum
    Alkaline Battery: Two C-cell 1.5Vdc (included)
    Lifetime: Up to 5 years with frequency of 1 reading per 10 minutes
    Lithium Back-Up** Battery: CR2032 (included) **RTC back-up only
    Optional AC Power Adaptor (UNIV-AC-100/240-5-M8):
    Nominal Output: 5 Vdc @ 0.6 A
    Input: 100 to 240 Vdc, 50/60 Hz
    Operating Temperature: 0 to 40 °C (32 to 104°F)

    Environmental

    Environmental Rating: NEMA 4 (IP65)
    Operating Conditions:
    Base Unit: -20 to 70 °C (-4 to 158°F),
    90% RH non-condensing
    CR2032 Battery: -20 to 60°C (-4 to 140°F),
    90% RH
    Alkaline Battery: -18 to 55°C (-0.4 to 131°F),
    90% RH non-condensing

    Mechanical

    Enclosure Material: Polycarbonate
    Enclosure Dimensions: 135.9 L x 82 W x 39 mm D (5.35 x 3.23 x 1.56”)

    General

    Agency Approvals: ECCN, EAR99
    EMC 2014/30/EU,
    LVD 2014/35/EU,
    RED 2014/53/EU
    Software: Compatible with SYNC and OEG)
    Compatible probes: zSeries*, Smart Probes *when using zSeries probes with the XW-ED-PRO, the discrete I/O will be disabled.