Series V10 Flotect® Mini-Size Flow Switch

FLOTECT® Mini-Size Flow Switch
Proof of Flow or No Flow in 1/2" to 2" Pipe, Low Cost, Leak Proof Body, Weatherproof

$0.00

Skip to the end of the images gallery

Series V10 Flotect® Mini-Size Flow Switch

Skip to the beginning of the images gallery

Description

Proof of Flow or No Flow in 1/2" to 2" Pipe, Low Cost, Leak Proof Body, Weatherproof

The SERIES V10 Flotect® Mini-Size Flow Switches is designed to provide inexpensive, reliable monitoring of the presence or absence of flow in a system. This series is available for field installation in pipelines from 1/2 to 2" diameter and available in brass or 303 SS body.

Product Applications

Proving flow in boilers, hot water heaters, and chillers
Protects pumps, motors and other equipment against low or no flow
Automatically starts auxiliary pumps and engines

More Information

Model Chart

EXAMPLE	V10	ST	Series V10SS-ST Flotect® Mini-Size Flow Switch, stainless steel housing, with stainless steel tag.
SERIES	V10 V10SS		Flotect® Mini-Size Flow Switch with Brass Housing Flotect® Mini-Size Flow Switch with 303SS Housing
OPTIONS		ST BSPT	Stainless Steel Tag BSPT Process Connection

Specifications

Service: Compatible gases or liquids.
Wetted Material: Vane: 301 SS; Body: Brass or 303 SS; Pin and Magnet: Ceramic 8.
Temperature Limit: 200°F (93°C).
Pressure Limit: Brass body: 1000 psig (69 bar), 303 SS body: 2000 psig (138 bar).
Enclosure Rating: Weatherproof, meets NEMA 4X (IP66).
Switch Type: SPST hermetically sealed reed switch. Field adjustable for normally open or normally closed.
Electrical Rating: 0.5 A @ 120 VAC; 1.5 A @ 24 VDC res.; 0.001 A @ 200 VDC res.
Electrical Connections: 18 AWG, 19" (483 mm) long, PVC jacket. Rated 221°F (105°C).
Process Connection: 1/2" male NPT standard. Contact factory for other options.
Mounting Orientation: Switch can be installed in any position but the actuation/deactuation flow rates are based on horizontal pipe runs and are nominal values.
Set Point Adjustment: Vane is trimmable.
Weight: 5.5 oz (0.16 kg).
Agency Approvals: CE, CSA, UR.
Switch Enclosure: Nylon.

Features

Magnetically actuated switching design gives superior performance with rugged, hermetically sealed reed switch
Simple field switch adjustment allows user to toggle between Normally Open (NO) or Normally Closed (NC) with no change in the electrical connection
Switch housing is located outside the process media, allowing simple switch changeover or maintenance without interruption of process flow
Full size, field trimmable stainless steel vane provided with removable template calibrated for brass or ductile iron reducing tees with forged steel straight tee/bushing combinations

Download Brochures