Toggle Nav
Search
CALL US
OUR LOCATIONS
Login
Cart 0
  • info@hkcalibrations.com.au
    • Menu
    Account

    LVDT Signal Conditioner, Loop Powered for AC LVDT

    The LDX-2 is a LVDT signal conditioner is input loop powered with wide input range of 30-530 mV/V and process output. IP65 sealed, high accuracy (0.02%)
    $715.67
    Enquire
    Email Print this Page

    Data Sheet (PDF)

    LVDT Signal Conditioner, Loop Powered for AC LVDT
    The LDX-2 linear displacement transmitter is a two-wire, 4 to 20 mA conditioner for ac LVDT transducers. It is designed for use where long transmission distances are required before the signal can interface with a controller or meter. A feature of two-wire operation is its low susceptibility to noise and cable resistance, making it ideal for industrial environments. Two-wire operation enables both power and signal to use the same pair of wires.

    SPECIFICATIONS

    ELECTRICAL
    Power Supply: 13 to 48 Vdc, up to 30 mA
    Supply Protection: Reverse polarity protected
    Transducer Drive: 0.9 V rms @ 5 kHz nominal, 13 kHz switchable
    Oscillator Protection: Open and short circuit protected
    Transducer Sensitivity Range: 30 to 530 mV/V in 2 coarse gain positions
    Range of Gain Control: 3.5 to 1 switched, 5 to 1 adjustable
    Range of Zero Control: Up to 100% on max gain
    Output Current: 4 to 20 mA 2-wire or 0 to 20 mA 3-wire
    Output Impedance: Effectively infinite
    Output Protection: Open and short circuit protected
    Output Ripple: <50 µA pk to pk @ 10 kHz
    Output Filter: Cut off frequency -3 dB @ 25 Hz second order linearity: <0.02%
    Operating Temp Range: 0 to 70°C (32 to 158°F)
    Storage Temp Range: -40 to 80°C (-40 to 176°F)
    Temperature Coefficient: Zero, better than 0.01% FS/°C; Gain, better than 0.01% FS/°C
    Long Term Stability: Zero, 0.2%/year typical; Gain, 0.3%/year typical
    Effect of Supply Change: Negligible
    Terminations: Screw terminals. Access through two cable ports for wires 1 to 5 mm (0.04 to 0.2") diameter

    MECHANICAL
    Weight: 220 g (7.7 oz)
    Mounting: Through holes in base by 2 screws and nuts; can be mounted to DIN 46277-1 rail
    Accessories Included:2 fixing screws and nuts
    Environment: Sealed to NEMA 12 ( IP65)
    Dimensions:54.5 H x 80 W x 108 mm L (2.13 x 3.12 x 4.21")