Toggle Nav
Search
CALL US
OUR LOCATIONS
Login
Cart 0
  • info@hkcalibrations.com.au
    • Menu
    Account

    Series 1620 Single and Dual Pressure Switch

    Single and Dual Pressure Switch
    High Reliability, Repetitive Accuracy within ±1%

    Enquire
    Email Print this Page
    Get A Quote To Calibrate This Device
    Series 1620 Single and Dual Pressure Switch

    High Reliability, Repetitive Accuracy within ±1%

    On the SERIES 1620 our old faithful switch design is still best where highest precision combined with diaphragm sealed leak proof construction and mounting simplicity are required. Model 1626 and 1627 differential pressure switches are identical in design and construction except that Model 1626 has a single electric switch and Model 1627 has dual electric switches. Model 1627 can therefore provide dual control when required. It can be set to open or close two independent electrical circuits, each preset for its own actuation pressure. Both units have diaphragm sealed motion take outs providing maximum protection against leakage.

    CAUTION: FOR USE ONLY WITH AIR OR COMPATIBLE GASES.

    Product Applications

    • Damper positioning
    • Duct air control
    More Information
    Model Chart
    EXAMPLE 1626 1 AT Series 1626-1-AT Pressure Switch, range 0.15-1.5" w.c., with aluminum tag.
    SERIES 1626
    1627    		     Single Electric Switch
    Dual Electric Switches
    RANGE   1
    5
    10
    20    		   0.15-1.5" w.c.
    0.5-6.0" w.c.
    2.0-11.0" w.c.
    8.0-24.0" w.c.
    OPTIONS     AT
    BGAP
    LC
    MIL
    PRESET
    ST
    WP    		 Aluminum Tag
    B-Gap Micro Switch
    Less Conduit
    MIL Switch
    Preset
    Stainless Steel Tag
    Weatherproof Housing
    Options
    • -MIL Environmental Construction. Can be furnished with a special snap switch sealed against the environment for temperatures down to -65°F., high humidity, exposure to fungus, and/or for military applications. Dead band is slightly greater and some lower set points may not be available. Specify Model 1626 or 1627 - (Range No.) - "MIL" and required set point in ordering.
    • -WP Weatherproof Housing. 16 ga. steel enclosure for unusually wet or oily conditions. Withstands 200 hour salt spray test. Gasketed cover. Weight: 20 lbs. Switch must be installed at factory. Specify "WP" in addition to switch catalog number.
    Service: Air and non-combustible, compatible gases.
    Wetted Materials: Consult factory.
    Temperature Limits: -30 to 130°F (-34.4 to 54.4°C).
    Pressure Limits: Max. 50 in. w.c. (12.44 kPa) continuous, 2 psig (13.79 kPa) surge.
    Switch Type: 1626: SPDT; 1627: (2) SPDT.
    Repeatability: ±1%.
    Electrical Rating: 15 A @ 120 to 480 VAC, 60 Hz. Resistive, 1/8 HP @ 125 VAC, 1/4 HP @ 250 VAC, 60 Hz.
    Electrical Connections: 3 screw type, common, normally open and normally closed.
    Process Connections: 1/8" female NPT.
    Mounting Orientation: Diaphragm in vertical position. Consult factory for other position orientations.
    Set Point Adjustment: Screw adjustment.
    Weight: Model 1626: 3 lb 9.8 oz (1.64 kg); Model 1627: 3 lb 11.8 oz (1.69 kg).
    Agency Approvals: CE.
    • Single or dual action switches support consistent designs with similar models, but with the ability to match specific application needs
    • Sealed diaphragm provides leak-proof construction for high accuracy and precision control